User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

atx_power_supply [2015/12/01 16:09]
Traumflug created
atx_power_supply [2018/05/27 16:10]
Line 1: Line 1:
-=====ATX Power Supply====== 
- 
-These supplies are made for desktop PCs and serve very well as a power supply for 3D printers. Specifications diidn'​t change much over the last decade, so salvaging one from an older PC is a good idea. 
- 
-=====ATX24 vs. ATX20===== 
- 
-{{ :​gen7:​gen7_atx20_in_atx24.jpeg?​direct&​300|An older ATX20 connector fits just nicely into the ATX24 header.}} 
- 
-Some 6 years ago the main power connector of these supplies got 4 additional pins. The older 20-pin connectors fit nicely into newer headers, so unless these new 4 pins are used, there is no drawback. [[Generation 7 Electronics]] does not use these 4 additional pins. 
- 
-=====Base Load===== 
- 
-{{ :​12v_halogen_as_5v_base_load.jpeg?​direct&​300|This shows a simple way to connect a lightbuld to an ATX PSU. The 5\_volts string is on the red wire.}} 
- 
-Some older ATX PSUs (not all) require a minimum load on the 5\_V rail to work properly. Whether your ATX PSU requires a base load or not has to be tried. A symptom of this problem is that the PSU will simply refuse to turn on, it immediately shuts down after being turned on, or emits a clearly audible high pitch whine, all unless there is a minimum load on the +5\_V rail. Connecting a 4.7\_ohms 10\_W resistor, an old CD drive or a 12\_V light bulb (into the 5\_V rail, see picture) are well proven methods to generate this "​dummy"​ load. 
  
atx_power_supply.txt ยท Last modified: 2018/05/27 16:10 (external edit)